SCHUNK SRU-plus Series - Installing the Sensors; Overview of Sensors

Assembly
44 14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443
5.5 Installing the sensors
DANGER
Danger of explosion in potentially explosive areas!
l
Observe supplementary sheet for products with explosion-
resistant versions "SRU-plus -...-EX".
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is prepared for the use of sensors.
l
For the exact type designations of suitable sensors, please see
catalog datasheet and }5.5.1 [/44].
l
For technical data for the suitable sensors, see assembly and
operating manual and catalog datasheet.
– The assembly and operating manual and catalog
datasheet are included in the scope of delivery for the
sensors and are available at schunk.com.
l
Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
5.5.1 Overview of sensors
SRU-plus MMS 22 MMS 22-PI1 IN 80
20
25
30
35
40
50
60