SCHUNK SRU-plus Series - Connections; Mechanical Connection

Assembly
14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443 25
5.2 Connections
5.2.1 Mechanical connection
DANGER
Danger of explosion in potentially explosive areas!
l
Observe supplementary sheet for products with explosion-
resistant versions "SRU-plus -...-EX".
NOTE
Adapter plates between the product and the machine/system as
well as the product and the attachment part must be made of
high-strength aluminum or steel. The tolerance class for the
fitting bore is H7.
Connections on
housing
The product can be assembled from two sides.
l
On the attachment side via through-bores
l
On the side of the apparatus via threaded holes
Centering sleeves for the mounting screws are included in the
accessory pack.
Assembly options
SRU-plus
①
Centering sleeve
②
Screws *
20 Ø12 M8 / 24
25 Ø12 M8 / 24
30 Ø12 M8 / 24
35 Ø12 M8 / 24
40 Ø14 M10 / 25
50 Ø16 M12 / 25
60 Ø16 M12 / 25
* Thread / max. depth of engagement from locating surface [mm]