SCHUNK SRU-plus Series - Pneumatic Connection

Assembly
14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443 29
5.2.2 Pneumatic connection
DANGER
Danger of explosion in potentially explosive areas!
l
Observe supplementary sheet for products with explosion-
resistant versions "SRU-plus -...-EX".
NOTE
l
Observe the requirements for the compressed air
supply, }3 [/19].
l
In case of compressed air loss (cutting off the energy line),
the product loses its dynamic effects and does not remain in
a secure position. However, the use of a SDV-P pressure
maintenance valve is recommended in this case in order to
maintain the dynamic effect for some time.
Air connections, variant with center position
Designation Function
Hose-free direct connection
a Swiveling 0° -90° / 0° - 180°
b Swiveling 90° - 0° / 180° - 0°
c Approach center position (M)
Extend locking position (VM)
d
Hose connection
A Swiveling 0° -90° / 0° - 180°
B Swiveling 90° - 0° / 180° - 0°
C Approach center position (M)
Extend locking position (VM)
D