Assembly
40 14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443
5.4.3 Adjust absorber stroke
CAUTION
Material damage to the product possible!
If the maximum adjustment range of the absorber stroke is
exceeded, this can cause leaks in the product.
l
When setting the absorber stroke, adhere to the maximum
adjustment range.
SRU-plus Max. adjustment range [mm]
20 7.5
25 7.5
30 7.5
35 6.5
40 6.5
50 10.5
60 10.5
1. Check deceleration of the movement in the end positions.
ð If the absorber stroke is too long, the end position is
reached too slowly.
ð If the absorber stroke is too short, the assembly impacts
in the end position.
2. On the first shock absorber (1):
remove cover (5).
3. Fix back stop A (2) and loosen nut (3) on stop pin A (4).
4. Fix back stop A (2) and set stop pin A (4).
To Next Page
Loading...
