Maintenance
14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443 65
8.6.2 Replacing external shock absorber (locked center position)
1. Fix stop (1) and unscrew the sealing nut (4) of the shock
absorber (3).
2. Turn shock absorber (3) out of the stop (1).
3. Mount O-ring (2) on new shock absorber.
4. Screw sealing nut (4) onto the shock absorber (3)
5. Screw in new shock absorber as far as possible.
6. Adjust absorber stroke, }5.4.3 [/40].
7. Fix stop (1) and tighten the sealing nut (4) of the shock
absorber (3).
8. Swivel repeatedly to test the setting, if necessary set
again, }6.4 [/53].
To Next Page
Loading...
