Start-up
14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443 51
6.3 Center position
NOTE
The center position can be adjusted by ± 3°. By design,
overshooting can occur in the center position.
Move to basic setting 90° (center position)
l
Actuate air connection "C" and "D" together, pinion begins to move.
ð Assembly swivels into center position.
Electrical circuit diagram actuation with one 5/3 and one 3/2 directional control valve, example
To Next Page
Loading...
