Translation of the original declaration of incorporation
82 14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443
9 Translation of the original declaration of
incorporation
in terms of the Directive 2006/42/EG, Annex II, Part 1 Section B.
Manufacturer/
Distributor
SCHUNK SE & Co. KG
Toolholding and Workholding | Gripping Technology | Automation
Technology
Bahnhofstr. 106 - 134
D-74348 Lauffen/Neckar
We hereby declare that the partly completed machine described below
Product designation: Pneumatic swivel unit / SRU-plus 20 - 60/pneumatic
ID number 361400...361599, 361600...361799, 361800...361999,
362000...362199, 362200...362399, 362600...362799,
362800...362999
meets the following basic occupational health and safety of the Machinery Directive 2006/42/
EC:
No. 1.1.1, No. 1.1.2, No. 1.1.3, No. 1.1.5, No. 1.3.2, No. 1.5.3, No. 1.5.4, No. 1.5.6, No. 1.5.8, No.
1.5.10, No. 1.5.11, No. 1.5.13
The partly completed machinery may not be put into operation until it has been confirmed
that the machine into which the partly completed machinery is to be installed complies with
the provisions of the Machinery Directive (2006/42/EC). The declaration shall be rendered
invalid if modifications are made to the product.
Applied harmonized standards, especially:
EN ISO 12100:2010 Safety of machinery - General principles for design -
Risk assessment and risk reduction
The special technical documentation according to AnnexVII, Part B, belonging to the partly
completed machine, has been created.
Person authorized to compile the technical documentation:
Stefanie Walter, Address: see manufacturer's address
Lauffen/Neckar, September 2023 Dr.-Ing. Manuel Baumeister,
Head of Systems Engineering,
Technology & Innovation
To Next Page
Loading...
