Design and description
14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443 21
4 Design and description
4.1 Design
Design
1 Housing
2 Back stops (0° - 180°)
3 Back stops (0° - 90°)
4 Pinion
5 Piston with shock absorbers
6 Cover
7 Cover
8 Clamp shell
8
Clamp shell *
* The variant "explosion-protected version" does not contain a clamp shell. It is
clamped by an eccentric.
9 Flange for fluid feed-through
10 Pinion for fluid feed-through
11 Monitoring with movable cam
12 Monitoring with fixed cam
13 Sensor holder with sensor
14 Attaching center position (0°-90°-180°)
15 Back stops locked center position
16 Pistions with shock absorbers locked center position
17 Attaching locked center position (0°-90°-180°)
To Next Page
Loading...
