Design and description
22 14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443
4.1.1 Variant with electrical feed-through (EDF)
Assembly with EDF
1 Base unit with fluid feed-through
2 EDF flange
3 Sensor holder with sensor
4 Monitoring with fixed cam
5 Distributor plate
4.2 Description
The product is a pneumatic rotary actuator for rotating and
swiveling movements.
Variant angle of rotation
With the angle of rotation variant, an angle of rotation of 90° or
180° can be set.
End position adjustability variant
With the end position adjustability variant, the end positions can
be adjusted from+3°/-3° or +3°/90°.
Variant center position (M), locked center position (VM)
The center position variant allows you to switch between
pneumatic and locked. The locked center position can be
unlocked when loaded.
Fluid feed-through (MDF) variant
With the fluid feed-through variant, gasses, fluids and vacuums
can be fed through without hoses.
Electrical feed-through (EDF) variant
With the electrical feed-through (EDF) variant, signals for
supplying the product can be carried out with operational safety.
To Next Page
Loading...
