EasyManua.ls Logo

SCHUNK SRU-plus Series - Lubricants;Lubrication Points (Basic Lubrication)

SCHUNK SRU-plus Series
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443 59
8.3 Lubricants/Lubrication points (basic lubrication)
WARNING
Risk of injury due to contact with lubricants!
Lubricant may cause irritation and allergic reactions if it contacts
the skin or eyes.
l
Avoid contact between lubricant and skin or eyes.
l
Wear safety goggles and protective gloves.
l
Observe information on the safety data sheet of the lubricant.
During maintenance, treat all greased areas with lubricant.
Thinly apply lubricant with a lint-free cloth.
SCHUNK recommends the lubricants listed.
Lubricant point Lubricant
The teeth and the pinion Rivolta F.L.G. GT-2
All seals Rivolta F.L.G. GT-2
The product contains food-compliant lubricants as standard.
Components such as rolling bearings, linear guides, or shock
absorbers are not provided with food-compliant lubricants.
The requirements of standard EN1672-2:2020 are not fully met.
NOTE
l
Change contaminated food-compliant lubricant.
l
Observe information in the safety data sheet from the
lubricant manufacturer.

Table of Contents

Related product manuals