Assembly
14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443 39
For the variants with pneumatic and locked center position, air
supply throttle valves must be mounted to various air
connections, }5.2.2 [/29]. The sequence for setting the swivel
speed with the air supply throttle valve is identical to the
sequence with mounted exhaust throttle valve.
In addition to air connections A and B the air connections C and
D must also be set for the variants with pneumatic and locked
center position.
For the variant with locked center position and separate piston
chambers, the air connections A1, A2, B1 and B2 must be set.
To Next Page
Loading...
