Assembly
28 14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443
5.2.1.1 Variant with electrical feed-through (EDF)
For the variant with electrical feed-through (EDF), it can only be
assembled on the system side via the threaded hole.
Assembly options
1 Threaded holes assembly on the system side
2 Customer's adapter plate
Attachment connection
If the hose-free direct connection is used, the set-screws must
be removed.
With the variant with electrical feed-through (EDF), assembly of
the attachment with fitting screws is not possible.
Attachment connection
1 Set-screw 2 Side air connection
To Next Page
Loading...
