Assembly
14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443 27
Attachment
connections with
fluid feed-through
Attachment connection with fluid feed-through up to size 30, example size 25
1 * factory installation position of the pinion: Numbers "1" on
the pinion and housing are aligned with each other.
①
Screws *
②
Screws *
③
Centering sleeve
M5 / 9 M5 / 9 Ø8
* Thread / max. depth of engagement from locating surface [mm]
Attachment connection with fluid feed-through from size 35, example size 50
A Screw connection diagram SRU-plus
B Screw connection diagram SRU-plus compatible with OSE
1 * factory installation position of the pinion: Numbers "1" on
the pinion and housing are aligned with each other.
SRU-
plus
①
Screws *
②
Screws *
③
Centering
sleeve
④
*
35 M6 / 10 M5 / 9 Ø6 M5 / 10
40 M8 / 9 M6 / 11 Ø8 M6 /11
50 M10 / 15 M8 / 13 Ø10 M8 / 20
60 M10 / 15 M8 / 13 Ø10 M8 / 20
* Thread / max. depth of engagement from locating surface [mm]
To Next Page
Loading...
