SCHUNK SRU-plus Series - Page 24

Assembly
24 14.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443
4. Screw in locking screws in open and not required air
connections where appropriate.
5. With the variant with electrical feed-through (EDF), connect
connection cable, }5.2.3 [/31].
6. For application cases with horizontal swivel axes, mount
separating sleeves, }5.3 [/33].
7. Adjust angle of rotation, }5.4.1 [/36].
8. Adjust swiveling speed, }5.4.2 [/38].
9. Adjust absorber stroke, }5.4.3 [/40].
10. Mount sensor if necessary, }5.5 [/44].