SCHUNK SWS 001 - 7 Maintenance; Notes; Maintenance Intervals

Maintenance
88
12.00 | SWS | Assembly and Operating Manual | en | 389456
7 Maintenance
7.1 Notes
Original spare parts
Use only original spare parts of SCHUNK when replacing spare and
wear parts.
7.2 Maintenance intervals
CAUTION
Material damage due to hardening lubricants!
Lubricants harden more quickly at temperatures above 60°C,
leading to possible product damage.
• Reduce the lubricant intervals accordingly.
Ambient
conditions and
operating
conditions
Maintenance
interval
Maintenance work
in dirty
environments or
with a tool change
>1time per
minute
tool change
<1time per week
weekly
monthly
Clean all parts thoroughly, check
for damage and wear and grease
with a lint-free cloth or brush,
Clean and lubricate product
[
}
91].
Check product for tightness,
replace seals if necessary,
Replace seals [
}
96].
Check alignment pins for
damage and wear, replace if
necessary,
Change alignment pins [
}
100].
Check sensors for damage and
wear, replace if necessary,
Change sensors [
}
103].
Check optional modules for
damage and wear, clean if
necessary and replace seals,
Maintain option modules [
}
114].
all as required Send damaged products to
SCHUNK for repair.