Operation
04.00 | WSG 50 | Assembly and operating manual | en | 389474
57
WARNING
These software limits do not represent a safety function as
understood by the machine directive!
NOTICE
The software limit switches are always related to the reference
position of the base jaws. Bodies on the base jaws or on the
gripper jaws are not included!
NOTE
• If the fingers are within the forbidden area when the software
limit switches are activated, then only movements to leave this
area will be possible.
• More information on this subject are in the manuals "WSG
Command Set Reference Manual" and "WSG Scripting
Reference Manual".
To Next Page
Loading...
