Scopus CODICO IRD-2600 - Page 53

IRD-2600 / IRD-2800
Integrated Receiver Decoders
P/N 2349-72784-00 Page 3-5
Table 3-3: IRD Front Panel Main Menu Options.
MENU DESCRIPTION
Configuration
Menu
The Configuration Menu option enables access to the Receiver,
Decoder and System configuration parameters. These options are used to
define or modify the IRD configuration:
• The Receiver Configuration Menu provides functions to configure
the operation of the receiver, depending on the type of receiver
installed in the IRD; QPSK (DVB-S), DSNG (DVB-DSNG), ATM
(DVB-PDH), QAM (DVB-C) or G.703 (E1, E2, E3)
• The Decoder Configuration Menu provides access to a further
sub-menu for Stream, CI, Video and Audio settings.
• The System Configuration Menu enables setup and control on the
IRD operation.
Refer to paragraph 3.2 for a detailed description of the IRD-2600/2800
Configuration Menu.
Status Menu The Status Menu option enables access to the Receiver, Decoder and
System status parameters. These options are used to view the IRDs
current configuration and status:
• Depending on the type of Receiver installed in the IRD, the Receiver
Status Menu provides functions to monitor the operation of the
receiver.
• The Decoder Status Menu provides access to a further sub-menu
for monitoring Stream, CI, Video and Audio operation.
• The System Status Menu enables viewing the IRD information.
Refer to paragraph 3.3 for a detailed description of the IRD-2600/2800
Status Menu.
Test Menu The Test Menu option enables access to special internal test procedures
on the Decoder section of the IRD.
Refer to paragraph 3.4 for a detailed description of the IRD-2600/2800
Test Menu.
Run Menu The Run Menu option enables access to high-level operation menus,
depending on the operation mode of the IRD – PID or Service Mode:
• When in Service Mode, the Run Menu provides sub-menus for
advanced control and operation functions, divided into Service, Mode
and Advance Sub-Menus.
• When in PID Mode, the Run Menu provides sub-menus for advanced
control and operation functions, divided into PID, Mode and Advance
Sub-Menus.
Refer to paragraph 3.5 for a detailed description of the IRD-2600/2800
Run Menu.