Scopus CODICO IRD-2600 - Page 70

User Manual
Chapter 3. Operation
Page 3-22 P/N 2349-72784-00
Table 3-7: Decoder / Video Configuration Sub-Menu Options
OPTION DESCRIPTION
Teletext Subtitling Page
Teletext Subtitling Select
Selects a page number for the EBU Teletext Subtitling.
Options available are: 100, through 899.
NOTES:
The Teletext Subtitling function is available ONLY when the PID mode is
activated.
Selection of the EBU Teletext Subtitling page from the PSI/SI tables can
also be done using the RUN/SERVICE Sub-Menu (see paragraph 3.5.1,
“TSubtitle SubService” option).
VITS Insertion
VITS Insertion Selection
Selects the Video Internal Test Signals (VITS) Insertion type:
Disable
VBI Lines 19,20
VBI Lines 17,18
VBI Line 17 (NTSC)
VITC Insertion
VITC Insertion Selection
Selects the Video Internal Time Code (VITC) Insertion type:
Disable
VBI Lines 12,14 (Extrn)
VBI Lines 14,16 (Extrn)
VBI Lines 16,18 (Extrn)
VBI Line 14 (Extrn)
VBI Line 19 (Extrn)
VBI Lines 12, 14 (Intrn)
VBI Lines 14 (Intrn)
NOTE
Extrn: The time code is taken from the stream GOP Header.
Intrn: The time code is locked to the internal IRD clock.
SMC Insertion
SMC Insertion Control
Enable/Disable the Sound Mode Control (SMC) insertion.
VPS Insertion
VPS Insertion Control
Enable/Disable the Video Programming Signal (VPS) insertion.
CC Insertion
CC Insertion Control
Controls the Closed Caption (CC) insertion.
Option available:
Disable: Disables CC insertion.
Enable (Decode LSB => MSB): Enables CC insertion LSB first.
Enable (Decode MSB => LSB): Enables CC insertion MSB first.