User Manual
Chapter 3. Operation
Page 3-40 P/N 2349-72784-00
Table 3-12: Decoder / CI Status Sub-Menu Parameters
OPTIONS DESCRIPTION
CI (SLOT 1) Main Menu
Slot 1 CI Module Name
Provides the name of the module installed in SLOT 1, in accordance with
EN 50221 requirements (refer to paragraph 8.4.2.2, table 21).
The name is filtered from the CIS Table in the module.
CI (SLOT 1) CA Specifier
Slot 1 CI Module Specifier
Provides the system ID of the module currently installed in SLOT 1,
in accordance with ETR-162 requirements (refer to paragraph 4.3, table 5).
CI (SLOT 1) Service Mode
Slot 1 CI Current Service
Displays the response of the module currently installed in SLOT 1 to the
service currently received.
Options available:
NO CA DESCRIPTORS: Service not encrypted.
NOT ENTITLED: Service encrypted but module in SLOT 1 not entitled to it
(i.e. service not enabled).
ENTITLED: Service encrypted and module in SLOT 1 entitled to it (i.e.
service enabled).
CI (SLOT 2) Main Menu
Slot 2 CI Module Name
Provides the name of the module installed in SLOT 2, in accordance with
EN 50221 requirements (refer to paragraph 8.4.2.2, table 21).
The name is filtered from the CIS Table in the module.
CI (SLOT 2) CA Specifier
Slot 2 CI Module Specifier
Provides the system ID of the module currently installed in SLOT 2,
in accordance with ETR-162 requirements (refer to paragraph 4.3, table 5).
CI (SLOT 2) Service Mode
Slot 2 CI Current Service
Displays the response of the module currently installed in SLOT 2 to the
service currently received:
Options available:
NO CA DESCRIPTORS: Service not encrypted.
NOT ENTITLED: Service encrypted but module in SLOT 2 not entitled to it
(i.e. service not enabled).
ENTITLED: Service encrypted and module in SLOT 2 entitled to it (i.e.
service enabled).
To Next Page
Loading...
