Seca 287 - Activating;Deactivating Announcement of Measured Results (Resul); Configuring Voice Output (Menu); Selecting Language (Lang); Setting Volume (VOL)

82 •
5.4 Configuring voice output (menu)
In the menu you can configure voice output and the beeps if required.
* Information on how to navigate in the multifunctional display menu can be
found on page 81.
Selecting language (LAng) You can select the language for voice output.
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
3. Use the arrow key (send/print) to select the menu item "LAng".
4. Confirm your selection.
The current setting is displayed.
5. Select the desired setting:
6. Confirm your selection.
You exit the menu automatically.
Setting volume (VOL) You can adjust the volume of voice output (0 = off, 100 = max.).
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
3. Use the arrow key (send/print) to select the menu item "VOL".
4. Confirm your selection.
The current setting is displayed.
5. To change the setting or call up a different submenu, press the arrow key
(send/print) until the desired setting (in this case: volume "20") is dis-
played.
6. Confirm your selection.
You exit the menu automatically.
Activating/deactivating
announcement of measured results
(reSUL)
You can set the device so that the measured results (weight, height and BMI)
are announced after every measuring operation.
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
..........
Voice Output
*
Language
Volume
Print
1...100
• On
• Off
•
PT• DE
• EN (US/GB)
• ES (ES/ME)
• FR
• ZH
• TH
• ID
•
KO
• RU
Results
• On
• Off
Instructions
On
•
•
Off