Seca 287 - Technical Specifications; General Technical Data

Technical data • 99
English
of the calibration counter. The person authorized to perform the recalibration
secures this sticker with an additional seal. The calibration counter sticker can
be ordered from seca service.
11.TECHNICAL DATA
11.1 General technical data
General technical data
Dimensions
•Depth
•Width
•Height
466 mm
434 mm
2270 mm
Net weight 16.5 kg
Ambient conditions, operation
• Temperature
•Air pressure
• Humidity
+10° C to +40° C (50 °F to 104 °F)
700 hPa - 1060 hPa
30 % to 80 %, no condensation
Ambient conditions, storage
• Temperature
•Air pressure
• Humidity
-10° C to +65° C (14 °F to 149 °F)
700 hPa - 1060 hPa
0 % to 95 %, no condensation
Ambient conditions, transport
• Temperature
•Air pressure
• Humidity
-10° C to +65° C (14 °F to 149 °F)
700 hPa - 1060 hPa
0 % to 95 %, no condensation
Height of digits
• Multifunctional display, three-line 14 mm
Power supply
• Power supply unit
- Supply voltage
- Maximum current consumption
12 V
typically 500 mA
Mains voltage 100 V - 240 V
Mains frequency 50 Hz - 60 Hz
Current consumption for multifunctional display/ultrasound head
- with wireless module deactivated, no backlighting and 50 %
volume
- with wireless module activated, permanent backlighting
(brightness: 100 %) and 75 % volume
Approx. 100 mA
Approx. 220 mA
Metrology data, height measurement
• Measuring range
•Graduations
60 cm - 210 cm
(1 ft: 11 5/8 inch - 6 ft: 10 5/8 inch)
1 mm (1/8 inch)
Accuracy
• 100 to 200 cm (at 20° C ambient temperature, no air movement, no
interfering objects in the environment of the measuring range)
± 5 mm (± 0.2 inch)
(at 3 ft: 3 3/8 inch and 6 ft: 6 6/8 inch)
EN 60601-1:
• insulated device, protection class II
• medical electrical device, type B
Type of protection IP 20
Operating mode Continuous duty
Medical device in accordance with Directive 93/42/EEC Class I with measuring function