Instructions for Use
Resting & Stress ECG with seca ct330/331 and seca diagnostic 5.9
Technical requirements for the operation of seca diagnostic
seca diagnostic SERVER, hardware and operating system
→ The seca diagnostic server is designed for operation on any
hardware or virtualized systems.
→ The hardware or the virtualised environment must meet the
minimum requirements of the operating system used.
→ The seca diagnostic server is based on Tomcat 9.0. Please note the
system requirements for Tomcat.
→ The PC or hardware must comply with the DIN EN 62368 safety
standard for information technology equipment.
seca diagnostic SERVER, minimum requirements
→ 2x vCPU each with 1.5 GHz
→ 4 GB RAM
→ HDD 500 GB
seca diagnostic SERVER, recommendations
→ 4x vCPU each with 2.5 GHz
→ 8 GB RAM
→ HDD 1TB (depending on use, two partitions 100 GB (system) and
900 GB user data)
seca diagnostic CLIENT, hardware and operating system
→ The seca diagnostic client is designed for operation on any
hardware or virtualized systems.
→ The hardware or the virtualised environment must meet the
minimum requirements of the operating system used.
→ The PC or hardware must comply with the DIN EN 62368 safety
standard for information technology equipment.
seca diagnostic CLIENT, minimum requirements
→ 6th Generation Intel Core-i processor or later
→ 4 GB RAM
→ At least 5 GB of free hard drive space
seca diagnostic CLIENT, recommendations
→ 9th Generation Intel Core-i processor or later
→ 8 GB RAM
→ At least 5 GB of free hard drive space
→ One of the following graphics cards:
→ NVIDIA Kepler (GTX 600 series) and above
→ AMD GCN 1st Gen (Radeon HD 7000 series) and above
→ Intel Haswell (4th-gen core) HD Integrated Graphics and above
→ USB connection
→ DVD or CD-ROM drive
→ One COM port each for ergometers and treadmills
To Next Page
