Instructions for Use
Resting & Stress ECG with seca
ct330/331 and seca diagnostic 5.9
3.2.2 Connecting and configuring seca ct331 (Bluetooth)
To use the USB port, perform the steps for configuring the USB port,
see 3.2.1 Setting up seca ct330 (USB), p. 33.
Setting up the Bluetooth connection
→ Plug the Bluetooth USB stick into the PC.
→ The driver installation starts automatically.
→ Check whether the Bluetooth driver has been installed correctly:
→ On your Windows desktop right-click on Workspace or Computer.
→ Select Manage in the context menu.
→ In the left half of the window click Device Manager.
→ In the right half of the window, open the Bluetooth Radios item.
→ Here you should see the items Broadcom BCM20702 Bluetooth 4.0
USB Device and Microsoft Bluetooth Enumerator.
Bluetooth connection between ECG device and PC
→ Switch on the device by pressing the On/Off button.
→ Open the Windows Control Panel.
→ There, click on Devices and Printers, Add Device.
→ The ECG device is found.
→ Select the entry seca ct331 in the “Add device” dialogue box and
click Next.
→ The device is added without pairing code.
To Next Page
Loading...
