2. Safety
SMF-MP10S User guide V1.1 Shanghai Seer Intelligent Technology Corporation 2
2. Safety
Please read this section before starting and running SMF-MP10S.
Notice
● We will
not responsible for any problems caused by damage, replacement or
modification of SMF-MP10S or its accessories in any way.
● We will not responsible for any damages to SMF-MP10S, accessories or any other
equipment due to programming errors or faults.
2.1 Types of Safety Information
This document contains the following types of safety information.
Warning
● Indicates a potentially dangerous situation that may cause death or serious injury.
● Appropriate preventive measures shall be taken to avoid damage or injury.
Caution
●
Indicates a potentially dangerous situation that may cause minor or moderate
personal injury, or a prompt to avoid unsafe behavior.
● Appropriate preventive measures shall be taken to avoid damage or injury.
Notice
● Indicates important information, including conditions that may cause damage to
equipment or property.
2.2 General Safety Precautions
This chapter contains the general safety precautions.
Precautions for Robot Rolling Over
● If the load is not placed or secured correctly, the load may drop out or the robot may
roll over.
● Ensure that the load is placed and secured correctly according to the specifications.
See 11.
Load Center.
Precautions for Personal Injury by Machine
● The high-speed slewing part of the vehicle body, such as universal wheels and driving
wheels, may cause personal injuries.
● Do not rely too much on the robot’s autonomous avoidance function. Please take the
initiative to avoid the robot.
Running Precautions
● The robot can’t observe the descending stairs and potholes on the floor.
● Please mark the stairs and potholes as prohibited areas on the map.
● Please update the map in time.
To Next Page
