SEER SFL-MP10S - List of Quick-Wear Parts; Cleaning; Floor Cleaning

9. Product Maintenance
SMF-MP10S User guide V1.1 Shanghai Seer Intelligent Technology Corporation 65
9.3 List of Quick-wear Parts
S/N Name Quantity Remarks
1 Balancing wheel 80X30 4
It is recommended to replace it every year
or every 8,000km
2 Rectangular spring 12X6X35 2
3
Drive wheel 100X80 (including
chain wheel)
2
It is recommended to replace it every year
or every 8,000km
4 Spring 1.5X16X75 3 Charging pile
5 Flanger bearing bush SF1612F 40
6 Tension spring 2.2 8
7 Composite sealing gasket 12 4
8 Composite sealing gasket G1_4 4
9 Double-row roller chain 2
10 Double-row chain wheel 2
11 Battery 48V/35Ah 1
It is recommended to inspect every 1 or
every 400 charge & discharge cycles.
12 Fork point photoelectric switch 2
13 Fork tooth in place switch 2
9.4 Cleaning
9.4.1 Floor Cleaning
Both the drive wheel and the universal wheel of the robot are made of polyurethane (PU),
which will inevitably leave marks on the ground after long-term running.
Epoxy Floor - Serious Traces