SEER SFL-MP10S - Establishment and Configuration of Workstation (AP) with Fork Action; Workstation (AP)

7. Debugging
SMF-MP10S User guide V1.1 Shanghai Seer Intelligent Technology Corporation 46
Description: If there is an obstacle on the path, the robot will stop in front of the obstacle in
the navigation process, and will not run further until the obstacle disappears. The blocking
reason will be displayed in the status bar.
7.4 Establishment and Configuration of Workstation (AP) with Fork
Action
a. Use the robot to build a map in the area where the robot needs to work.
b. Establish the AP point on the shelf and place it in the daily work position.
c. Configure the workstation.
7.4.1 Workstation (AP)
The AP point is a workstation where the forklift has actions here, such as picking up,