5. Battery and Charging
SMF-MP10S User guide V1.1 Shanghai Seer Intelligent Technology Corporation 22
BMS Protection Performance Parameters
Overcharge
protection
Overcharge voltage 4.25V (single-series) Adjustable
Overcharge protection delay 3S
Overcharge release voltage 4.15V (single-series) Adjustable
Over-discharge
protection
Over-discharge voltage 2.75V (single-series) Adjustable
Over-discharge protection delay 3S
Over-discharge release voltage 3.0V (single-series) Adjustable
Overcurrent
protection
Overcurrent detection current 110A@3S
Overtemperature
protection
Temperature protection
Charge: 55℃;
discharge: 65℃
Short-circuit
protection
Short-circuit protection
Disconnected load
recovery
Balancing Balancing method Passive balancing
5.2 Parameters of Charger
Please pay attention to the automatic and manual charging interfaces on the front and side
of the robot.
1 Automatic charging interface
To Next Page
Loading...