9. Product Maintenance
SMF-MP10S User guide V1.1 Shanghai Seer Intelligent Technology Corporation 58
9. Product Maintenance
9.1 Maintenance Instructions
Before performing any maintenance or troubleshooting activities, please read the content of
this chapter, this manual and other related manual carefully to understand the safe
maintenance and troubleshooting procedures fully.
Only authorized personnel who have passed safety training and other related training can
maintain the robot system. Other related training includes training on robot system and
training on maintenance organized by the manufacturers, distributors, and local importers.
Operators shall participate in safety training in accordance with national regulations.
Usage Precautions for Robot Parts
● Only approved parts can be used.
●
If unapproved parts are used without authorization, we will not bear any
responsibility. We will not responsible for any damage to the robot, accessories or
any other equipment caused by the use of unapproved parts.
Precautions for Robot Maintenance
● Perform maintenance in strict accordance with the description in this manual. Do not
dismantle or change any parts not described in this manual without authorization.
Wrong dismantling, changing parts, or wrong maintenance may cause the robot
system to work abnormally and cause serious safety problems.
● When you need to enter the working area of the robot under emergency, stop the
system.
● Please carry out maintenance and repair activities in the designated maintenance
area. Before performing any maintenance, always remove the robot from the system
and turn off the power supply for the robot to prevent the robot from moving
suddenly when it receives the system instructions.
To Next Page
Loading...