3. Product Introduction
SMF-MP10S User guide V1.1 Shanghai Seer Intelligent Technology Corporation 17
Note 3: The gradient color in the static state shows the battery level. Red: full grayscale
255*(1- Power percentage), green: full grayscale 255* power percentage.
Note 4: When the robot is stationary, the battery type is not configured or the battery
communication error occurs.
Description: The above sequence is the priority of the ambient light display, i.e., the error
alarm has priority over the emergency stop display. After the high-priority conditions are
met, the corresponding ambient light effect will be displayed, and the low-priority
conditions will no longer be judged. The time interval between each update is about 300ms.
3.6.2 Searchlight
SMF-MP10S is equipped with a searchlight, which will be lit up when it is turned on,
indicating that the robot is on.
3.7 Technical Parameters
Model Parameters SMF-MP10S
Quantity of navigation lasers 1 (Pepperl + Fuchs R2000-HD/ SICk nanoScan3 Core)
Quantity of obstacle avoidance Lasers 1(OLEI LR-1BS2L)
Driving form Two-wheel differential
Dimensions
L * W * H 1585mm*885mm*1836mm
Weight (including battery) 210kg
Color
Shell color Blue + black
Network Interface
Wireless network Inside Moxa AWK-1137C
Battery
Battery capacity 48V 35Ah three-cell battery
Battery life ≥ 8h
Charging time 0-80%: 2h
Charging method Manual/automatic (with automatic charging piles)
Battery charge and discharge cycles > 500 times
Operation Panel
Emergency stop button √
Buzzer √
To Next Page
Loading...