3. Product Introduction
SMF-MP10S User guide V1.1 Shanghai Seer Intelligent Technology Corporation 18
Power indicator √
Audio and Ambient Light
Speaker √
Light strip √
Performance Parameters
Maximum load 500kg
Passability
1
Slope < 5%, step < 0.5cm, gap < 1cm
Localization accuracy
2
± 10mm, ± 1.0°
Navigation speed
3
≤ 0.9m/s
Map area (single frame) ≤ 200000m²
Functions
Basic functions
4
√
Wifi roaming √
Automatic charging
5
⚪
Pallet recognition
⚪
Laser reflector navigation
6
√
3D obstacle avoidance
7
⚪
Environment
Ambient temperature and humidity range
0℃-50℃ (humidity 10-90%, without compression
condensation)
IP rating
8
IP20
√ Supported
× Not supported
⚪
Optional
1. The road surface should be smooth, clean and free of obvious ups and downs. Ramp 5% =
arctan (0.05) ≈ 2.8°. The robot must not stop or turn at the ramps, steps, or gaps, but can
pass quickly perpendicular to them.
2. The localization accuracy usually refers to the repeatability of the robot navigating to the
target site. When the environment scanned by the robot’s laser radar is relatively stable, the
repeatability of the robot navigating from a fixed direction to the target site can reach the
expected value. When the robot runs along the virtual path, it will try to fit the path as much
as possible, but repeatability is not guaranteed. That is, the robot can guarantee the
To Next Page
Loading...