NOTICE!
(**4) Via DiggiMEC or Smart view, it is possible to conó°ŠŸgure the device for either
calculated or measured ground (earth) current.
(***4) Via DiggiMEC or Smart view, it is possible to conó°ŠŸgure the device for either 50 Hz
or 60 Hz nominal frequency.
(****) Trip of the backup protection as soon as suó°Š¡cient electrical energy for a trip
impulse has been collected.
(#) SCADA communication is planned for the next Release.
(##) Broad-Range CTs are available only for WIC1‑1 and WIC1‑4 – Ask for availability!
36 WIC1 WIC1-1.0-EN-MAN
2 WIC1 – Introduction and General Information
2.6.1.2 Order Form of the Dual-Powered WIC1‑4
To Next Page
Loading...
Need help?
General
