22
www.seuservice.com
Move the controller cabinet nearer to the PTV cabinet.
Connect the wires between the controller cabinet and the PTV cabinet. Connect the 7 connec-
tors.
Insert the controller cabinet into a square opening of the PTV cabinet. In this instance, be care-
ful not to catch the wires in the cabinets.
Attach the joint bracket L and R onto the contacting surfaces of the controller cabinet and PTV
cabinet. Carefully use the hexagon head screws because the ones for the former cabinet and the
others for the latter cabinet are different in size from each other.
Do not catch the wires in the cabinets.
CONTROLLER CABINET
HEXAGON BOLT (2ea), black
M8×50, w/spring washer,
at washer used.
HEXAGON BOLT (2ea), black
M8×35, w/spring washer,
at washer used.
JOINT BRACKET R
OPPOSITE SIDE: JOINT BRACKET L
FIG. 6. 2 g
To Next Page
Loading...
