33
www.seuservice.com
Insert both the GD cable connector (for data communication) and the power cord connector
(JST NH6P) into the GD-ROM drive. Be careful about an inserting direction in this instance.
Make sure that the connectors are inserted rmly and completely.
Insert Key Chip straight into the hole on the Media Board side of upper part of the Game Board.
Be sure to check the alignment of the key chip and push it all the way in.
PHOTO 6. 6 l
PHOTO 6. 6 m
GD CABLE CONNECTOR
POWER CORD CONNECTOR
KEY CHIP
To Next Page
Loading...
