Sega VIRTUA COP - Page 84

76
www.seuservice.com
77
www.seuservice.com
 Remove 1 screw and detach the
microswitch (with SW bracket
attached) from the right shell.
PHOTO 10 f
 Disconnect the microswitch wire connector.
PHOTO 10 g
Disconnect the connector.
 Remove the 2 screws and remove the SW bracket from the microswitch.
PHOTO 10 h
SCREW (1)
M3×8, w/at & spring washers
SCREW (2)
M2.3×10, w/at & spring washers