Sencore OmniHub 6 - Page 78

OmniHub 6/6D– User Manual
Page 78 of 182
3.4.6.1 Module Basic Settings
Click Advanced Setting to see all parameters you can modify and check specific
parameters you want to set and see. Click the Apply button on the right side to make the
change take effect.
Click Advanced Setting in the line to set encoding parameters.
Video Parameter
Range
Video Parameter
Range
Video Iput Format
NTSC, PAL
Brightness
0~100
Video Encoding
Format
H264
Contrast
0~100
Video Bitrate (Kbps)
600~6000
Saturation
0~100
GOP Size
1~60
Chrominance
0~100