OmniHub 6/6D– User Manual
Page 128 of 182
The System Status ( ) which reports the current status of the system.
Green indicates the system operation is good while Red indicates there is some detail
about the system that is currently in Alarm condition. A Red condition prompts the user
to seek further information about the Alarm condition by viewing the Logs tab.
3.6.4.2 Module Settings
The Basic Settings Tab is used to configure the video processing details. This will
include signal direction (transmit, receive or both), addresses to be received or delivered
to and labeling of the gateways to help the user distinguish gateways from one another.
The number of available gateways will depend upon the license key that is applied.
Adding a Channel
Click on the button in the upper left area of the page to create a new or
additional gateway. This will open a configuration window and allow the user to define the
‘Alias’ or label for the gateway; the receive and/or transmit addresses
To Next Page
Loading...
Need help?
General
