OmniHub 6/6D– User Manual
Page 167 of 182
9. Click the Accept Changes button and that should be the last of the configuration.
EAS Testing with Monroe Box
1. To force the Monroe box to do a test and send an SCTE18 message, press the
Select button on the front panel of the unit TWO TIMES.
This will cause the unit to:
a. Display an EAS screen on the CVBS video output
b. Send two SCTE18 messages
c. Start playing the alert audio
2. The SCTE18 messages will continue to be sent during the playing of the EAS
audio message every 6 seconds. When the EAS audio messageplaying is
finished, the SCTE18 messages will no longer be sent.
3. When the OmniHub 6/6 receives the first SCTE18 message on the management
port, it should trigger it to replace all services on the output with an encoded
version of the Monroe video and audio outputs. 15 seconds after the last
SCTE18 is received, the OmniHub 6/6 should return all services to their original
content.
APPENDIX C - Specification
OmniHub 6/6D - Base unit
Includes - 1RU chassis/case, power supply/line
cord
Systems -
Chassis Dimension 445mm x 44mm x 428mm
(W x H xD), 1RU
Front Panel 4 Gigabit Ethernet port
Rear Panel 6 Hot Swappable Slot for 6 modules
Single/Dual Power Supplies
Remote Operation/Update Interface -
Type Ethernet, 10/100
Front Panel Indicators Link (Green LED). Activity (Amber LED)
Connector RJ45
Operating Temperature - 0 to 50°C
Storage Temperature - -10 ~ 70°C
Operating Humidity - <95%
AC Power -
Operating Voltage 100 ~ 240VAC
PSU Max Power 120W
Line Cord Detachable, 3-prong
To Next Page
Loading...
Need help?
General
