Sennheiser ADN C1 - Page 48

ADN Digital Conference System | 47
Configuring the conference system via the central unit
“XLR Out” menu
“XLR Out Status” Activates/deactivates the OUT audio output “On”/“Off” 55
“XLR Out Volume” Adjusts the volume of the XLR output
“01” ... “32”
“XLR Out Equalizer” Adjusts the tone color of the XLR output
“−12 dB” ... “+12 dB”
“XLR In” menu
“XLR In Status” Activates/deactivates the IN audio input “On”/“Off” 55
“XLR In Sensitivity” Adjusts the sensitivity of the XLR input
“−18.0 dBu” ... “+18.0 dBu”
“XLR In Equalizer” Adjusts the tone color of the XLR input
“−12 dB” ... “+12 dB”
“Floor/Loudspeakers” menu
“Floor/Loudspeakers Volume” Adjusts the floor channel volume (“Floor/
Loudspeakers”)
“00” ... “32”
56
“Floor/Loudspeakers Equalizer” Adjusts the tone color of the floor channel
“−12 dB” ... “+12 dB”
“Feedback Suppression” menu
“Loudspeaker” Changes the volume adjustment of the conference
units’ built-in loudspeakers in order to increase the
max. possible volume while the risk of feedback
due to the increased volume is reduced.
“Off”
low (approx. +2 to +3 dB)
“Low Intensity”
high (approx. +5 to +6 dB)
“High Intensity”
57
“XLR Out” Changes the volume adjustment of the OUT audio
output in order to increase the max. possible
volume while the risk of feedback due to the
increased volume is reduced.
“Conference Recording” menu
“Record” Activates/deactivates the audio recording of the
conference channels on a USB mass storage device
“On”/“Off” 58
“Recording status” Provides information on the status of the audio
recording and on the available memory space on
the USB mass storage device
Display Function of the menu item Option/display Page
XLR Out Volume
No
+ 6 dB
+ 6 dB
XLR Out Equalizer
No
+02 dB
–03 dB
+05 dB
XLR In Sensitivity
No
+07.5 dBu
+07.5 dBu
XLR In Equalizer
No
+02 dB
–03 dB
+05 dB
Floor/Loudspeaker Volume
No
16
16
Floor/Loudspeaker Equalizer
No
+02 dB
–03 dB
+05 dB
Recording Status
No
Status : Off
Free Space : 123456 MB