Configuring the conference system via the central unit
46 | ADN Digital Conference System
Display Function of the menu item Option/display Page
“Main Menu”
“Conference Menu” Calls up the “Conference Menu” submenu – 50
“Audio Menu” Calls up the “Audio Menu” submenu – 55
“System Menu” Calls up the “System Menu” submenu – 59
“*Languages” Adjusts the language “Deutsch”, “English”,
“Espanol”...
69
“Settings” Calls up the “Settings” submenu – 70
“Conference Menu”
“Conference Mode” Adjusts the conference mode “Direct Access”, “Override”,
“Push To Talk” or “Request”
50
“Microphone Limit” Sets the maximum number of speakers who can
take the floor simultaneously for all conference
modes
“1” ... “10” 51
“Request Limit” Sets the maximum number of requests to speak for
“Request” and “Direct Access” mode
“0” ... “10” 52
“Talk Time Status” Activates/deactivates the speaking time limit “On”/“Off” 52
“Talk Time Limit” Sets the speaking time limit “01” ... “60”
in steps of 1 minute
52
“Premonition Time Limit” Sets the advance warning time (warns speakers
that they are approaching the end of the individual
speaking time)
“00” ... “120”
in steps of 10 seconds
53
“Reaction on Talktime Exceed” Determines the behavior when the individual
speaking time is exceeded
“Continue”/“Cancel” 53
“Blink on Request” Activates/deactivates the flashing of the signal
light ring when a request to speak is made
“On”/“Off” 54
“Re-Init” Re-initializes the conference units “Yes”/“No” 54
“Clear Request List on Cancel” Sets the function of the priority key of the chair-
person unit
“On”/“Off” 54
“Audio Menu”
“XLR Out” Calls up the “XLR Out” submenu – 55
“XLR In” Calls up the “XLR In” submenu –
“Floor/Loudspeakers” Calls up the “Floor/Loudspeakers” submenu –
“Audio Gain Reduction” The sum signal of all active conference units is
output via the floor channel (“Floor/Loudspea-
kers”). The “Audio Gain Reduction” menu item
allows you to adjust how the volume levels of
the signals of the individual conference units
are processed.
“0.0 dB per Mic” ...
“−3.0 dB per Mic”,
“Linear Division”
56
“Feedback Suppression” Calls up the “Feedback Suppression” submenu – 57
“XLR Mix Minus” Activates the filtering of the IN audio input
from the OUT audio output in order to avoid,
for example, double audio signals during
teleconferencing
“On”/“Off” 58
“Mic Loudspeaker Mute” Deactivates the conference units’ built-in loud-
speakers for contributions coming from the
conference units’ microphones
“On”/“Off” 58
“Conference Recording” Calls up the “Conference Recording” submenu – 58
To Next Page
Loading...
