The SL Bodypack DW
128
►
Connecting the clip-on microphone or the headset
microphone to the bodypack transmitter
Only connect the clip-on microphone or the headset micro-
phone recommended by Sennheiser. These microphones are
optimized for the bodypack transmitter.
►
▷ Connect the jack plug of the clip-on microphone or headset
microphone to the 3.5 mm jack socket (MIC/LINE) of the
bodypack transmitter.
▷ Lock the jack plug by screwing down the coupling ring.
When the jack plug is not firmly locked, crackling noise can
appear in the audio signal.
Alternatively, you can use a 3.5 mm jack cable to con-
nect a line source (e.g. a smartphone, tablet or laptop)
to the bodypack transmitter.
To Next Page
Loading...
