The SL Handheld DW
116
Displays on the display panel of the SL Hand-
held DW
►
1 Name of the radio link
• Can be entered in the Device Identification menu of the
receiver (see „Using the operating menu of the receiver“).
2 7-step display of the accupack or battery capacity
• Graphically displays the current charge status of the ac-
cupack or the batteries.
• If you use the accupack, the remaining operating time is
displayed in hours.
3 RF output power of the transmitter
• Displays the RF output power of the handheld transmit-
ter.
4 6-step display for the RF signal level
• Displays the current level of the RF signal
Starting up and using the handheld transmit-
ter
Removing/inserting the accupack
The accupack must be charged before the first use. The accu-
pack can either be charged with the optional CHG 2 or CHG 4N
chargers (see „The CHG 2 charger“ or „The CHG 4N charger“)
or with the supplied USB cable.
To remove the accupack:
▷ Simultaneously press the two unlock buttons and pull the
accupack away from the handheld transmitter.
To Next Page
Loading...
