Pairing
158
Identifying paired devices
You can perform a pairing identification to see which transmit-
ter is paired with which receiver.
With the SL Rack Receiver DW, you can perform pairing iden-
tification on the device or in the Control Cockpit.
With the SL MCR DW, you can only perform the pairing iden-
tification in the Control Cockpit.
The SL Rack Receiver DW
▷ Short-press the PAIR button of the receiver or of the trans-
mitter.
or
▷ Press the Find button of the desired device from the device
list in the Control Cockpit.
►
• Identify appears on the display panel of the receiver.
• The message This is
Name
appears on the transmitter's
display (only SL Handheld DW and SL Bodypack DW).
• The status LEDs of the paired devices flash green for 10
seconds.
• The device's icon in the Control Cockpit flashes for 10 sec-
onds.
• The display returns to the standard display after 10 sec-
onds.
To Next Page
Loading...
