The CHG 2W charging base
194
Connecting the CHG 2W charging base to the
power supply system
To connect the CHG 2W charger to the power supply system:
►
▷ Connect the cable end of the power supply unit to the sock-
et at the base of the charger.
▷ Make sure you insert the plug all the way. You should feel it
lock into place.
▷ Guide the cable through one of the two cable guides at the
base of the charger so that the charger is stable once in po-
sition.
▷ Plug the power supply unit into a wall socket.
To Next Page
Loading...
