The CHG 2 charger
181
Charging the accupack in the CHG 2 charger
To charge an accupack in the CHG 2 charger:
►
▷ Insert the transmitter with the accupack installed and with
the charging contacts facing downwards into the charger.
Make sure to insert the transmitter the correct way round:
The STANDBY button of the bodypack transmitter has to
point in the direction of the charger's charge status LED.
The charge status LED lights up red when the accupack is
being charged. The charge status LED lights up green when
the accupack is fully charged.
To Next Page
Loading...
