Sennheiser SpeechLine - Product overview and operating elements

SL MCR DW
93
Product overview and operating elements
1 Status LEDs
• See „Meaning of the status LEDs“
2 Analog Out 3-pin socket
• Analog audio output (see „Connecting the receiver“)
• Suitable for Phoenix Contact MCVW 1.5-3-ST-3.81
3 Reset button
• To restore the factory settings
• Hold for 5 seconds
4 Dante I / PoE / Ctrl RJ-45 socket
• Digital audio output (see „Connecting the receiver“)
• PoE supply (Power over Ethernet) (see „Putting the re-
ceiver into operation“)
• Configuration via the Sennheiser Control Cockpit or a
media control system (see „Controlling and monitoring
the receiver via the network“)
5 Dante II RJ-45 socket
• Digital audio output (see „Connecting the receiver“)
123
45
Front Back