SL MCR DW
100
Mounting the receiver
Safety instructions for installation
Observe the following safety instructions when installing the
product.
▷ The physical mounting and all electrical installations must
be performed by a specialist.
▷ The specialist must have sufficient professional training,
experience and knowledge of applicable provisions, regula-
tions and standards to be able to properly assess the work
assigned to them, identify possible hazards and take ap-
propriate safety measures.
▷ When mounting the product, observe and follow all local,
national and international regulations and standards.
The following mounting variants are available:
Mounting the receiver on the wall
To mount the receiver on the wall, you will need the mounting
frame supplied.
Screws and anchors for mounting the product to the
wall are not included with delivery. Use screws and an-
chors that are appropriate for the particular character-
istics of your wall.
To Next Page
Loading...
