Sennheiser SpeechLine - Performing a walk test (reception quality)

Performing a walk test (reception quality)
164
Performing a walk test (reception quali-
ty)
The Walk Test menu item allows you to check the reception
quality of your radio links within the operating environment. By
performing a walk test, you can verify the range and coverage
of the radio link.
Return to first page of the instruction manual
Performing a walk test with the SL MCR DW in the
Control Cockpit
To perform a walk test in the Control Cockpit:
▷ Switch on the transmitter and the receiver of the radio link
you want to check.
▷ In addition, switch on all other devices that you want to use
in the operating environment.
▷ Select the device in the Control Cockpit.
▷ Open the RF settings tab.
►
▷ Select the desired channel under Walk Test and click
Start.
►
▷ Walk the operating environment with the transmitter.