SL Rack Receiver DW
72
Cockpit and enter the IP address you saw in the settings
menu.
Or:
▷ Activate the mDNS function in the receiver’s Network Set-
tings menu (factory setting: deactivated).
▷ Restart the receiver.
Once restarted, the receiver is automatically detected in
the Sennheiser Control Cockpit.
mDNS = multicast Domain Name System: resolves
host names to IP addresses within small networks
that do not include a local name server. Used for auto-
matic device discovery.
Integrating the receiver into a network without
DHCP using Fixed IP
If there is no DHCP server in the network and you are working
with fixed IP addresses, please observe the following informa-
tion.
▷ Set the Mode to Fixed in the receiver’s Network Settings
menu.
▷ Manually enter an IP address in the IP option in the receiv-
er’s Network Settings menu.
To add the receiver in the Sennheiser Control Cockpit:
▷ Use the Add Device function in the Sennheiser Control
Cockpit and enter the IP address you selected.
Or:
▷ Activate the mDNS function in the receiver’s Network Set-
tings menu (factory setting: deactivated).
▷ Restart the receiver.
Once restarted, the receiver is automatically detected in
the Sennheiser Control Cockpit.
mDNS = multicast Domain Name System: resolves
host names to IP addresses within small networks
that do not include a local name server. Used for auto-
matic device discovery.
To Next Page
Loading...
