SL Rack Receiver DW
89
Walk Test
• Starts the walk test. See „Performing a walk test (reception
quality)“
Factory Reset
• Yes: All settings are reset to the factory defaults.
• No: The settings are retained.
System Info
• Displays the serial number and the current firmware version
of the receiver.
The Network Settings menu
The Network Settings menu at menu level 1 allows you to adjust the following settings.
Mode
• Automatic: The IP address is automatically assigned using
DHCP. If no DHCP server is available, the IP address is as-
signed by the SL Rack Receiver DW itself.
• Fixed IP: The IP address has to be entered manually.
mDNS
• Disabled: Deactivates mDNS to reduce the data volume
transferred across the network. This option is recommend-
ed for larger systems.
• Enabled: Activates mDNS to allow for automatic device de-
tection. This option is recommended for smaller systems
with up to 30 devices.
To Next Page
