9.1
SECTION 9 SPARES
9.1 Ordering spares
Spare parts may be ordered from addresses shown on the rear cover of the manual.
When ordering spares always give the model and serial number of your analyser. The
analyser serial number is on the identification label on the underside of the analyser,
it may also be displayed via the user interface.
WARNING
There are no user serviceable parts inside of the xentra 4900
analyser. The instrument enclosure protects against electrical shock
and injury. Refer servicing to qualified personnel.
Removal of the enclosure lid may invalidate the instrument warranty.
9.2 Spare parts list
Spare parts common to all xentra 4900 models
04900001B Operator manual, 4900 Model B
04900002B Service manual, 4900 Model B
S4000978 Main power fuses for 170-264V operation,
10 off 20mm T3.15 A HBC *
S4000979 Main power fuses for 85-132V operation,
10 off 20mm T 5.0 A HBC *
S4000986 Kit socket 14W signal
2388-1981 Filter element, 80 mm Sq fan*
Spare parts for rack mounting
S4000984 Rack mount kit, short chassis
S4000985 Rack mount kit, long chassis
Spare parts for sample filter
S4000987 Kit, fine filter cap and ’o’ ring
S4000988 Kit, filter elements 6
:m*
* Recommended spares
To Next Page
Loading...
Need help?
General
